Electric Arc Furnace CURRENT CONDUCTING ELECTRODE ARM copper steel

Our design and construction are time tested and proven. It offers you the benefits of low maintenance cost while improving electrical efficiencies.

The clamping device is easily accessible for inspection and repairs.

The clamp ring can be quickly removed in the event of damage from electrode breakage or arcing.

Copper clad explosion plate is used in the construction of the arms to ensure there is no lamination in the material.

The arms are made of a rectangular welded box type design and copper plated in the areas of main current flows.

The terminal connections for the cables will be made of a forged copper section which will accept your current cables with no modifications.

The entire arm body is water cooled from inside.

All critical components on the electrode arms are protected within the copper clad steel. This includes the water piping for the spray rings and the hydraulic lines for the clamping mechanism.

The electrode shoe is designed for a flat connection to the arm body. This allows for easy replacement and repairability. Alignment of the shoe is simplified and costs are reduced.

The contact shoe is made of forged copper with bored water cooling channels to achieve good heat transfer. Water supply is maintained by a flanged water connection.

Beijing Sino Steel Engineering & Equipment Co., Ltd. is concentrating on developing of ferrous & non-ferrous making and Rolling technology, mainly.

As one of the most experienced Chinese suppliers of complete line and components for steel and non-ferrous industries, Beijing Sino Steel Engineering & Equipment Co., Ltd. is engaged in design, manufacturing, engineering and service activities on word-wide basis.

Overseas Partners (Office):

India, Indonesia, Malaysia, Thailand, Korea, Turkey, UAE, Qatar, Iran, Saudi Arabia, Kuwait, Germany, France, Canada, USA, Brazil, Etc.

MAIN SCOPE SUPPLY:

EPS Project Line:

EAF, LF, Continuous Casting Machine, Preheating Furnace, Hot Rolling Mill Line, Cold Rolling Line, Centrifugal Casting Line, Slitting Line,Cut-to-length Line, Cleaning Line, Pickling Line, Coating line, Levelling line, Billet grinding line ETC.

Components & Parts:

Mill stand, Coiler, Uncoiler, Gearbox, Leveller, Copper Mould Tube, Copper Mould Plate, Water Jacket, Water Cooled Cable, Forged Rolls, Casting Rolls, Roll Shell, Roll Core,Bearing, Universal Shaft, Lathe, ETC.

​