S Water Cooled Power Cable Fire-Resistant Rubber Hose high conductivity electrolytic copper

Arc Furnace Brief Description

Furnace component:

1. The first layer:

1.1. Furnace mantle
1.2. Furnace brick lining
1.3. Taphole system
1.4. Arc burner

2. The second layer:

2.1. Furnace cover
2.2. Electrode jaw
2.3. Short net
2.4. Brasses
2.5. Electrode shell
2.6. Baiting system
2.7. Furnace charge stirrer
2.8. Purging system
2.9. Water cooling system
2.10.Technical data table of ore heating furnace transformer
2.11.Operating system

3. The third layer:

3.1. Hydraulic circuit
3.2. Electrode slipping equipment
3.3. Electrode lift system
3.4. Steel platform
3.5. Hopper and ring-shaped vehicle for arrange material

4. Subsidiary facilities: such as feeding system and feed proportioning system

Water cooled power cables are used for supplying electrical current from transformer output, i.e., low voltage stationary bus tubes or bus bars to bus bars of the electrode holding arm of the furnace.

All the power required for melting operation, passes through the secondary circuit thus, limiting the losses in this circuit, by way of low reactance and be balanced as close as possible between the phases.

This balancing of phase eliminates the transposed resistance component, which reduces the hotspot problems in the electric arc furnace. Due to the presence of large fluctuations to which these cables are subjected, the permissible current density should be 4 to 5 A/mm².

Brief construction details:

Beijing Sino Steel Engineering & Equipment Co., Ltd. is concentrating on developing of ferrous & non-ferrous making and Rolling technology, mainly.

As one of the most experienced Chinese suppliers of complete line and components for steel and non-ferrous industries, Beijing Sino Steel Engineering & Equipment Co., Ltd. is engaged in design, manufacturing, engineering and service activities on word-wide basis.

Overseas Partners (Office):

India, Indonesia, Malaysia, Thailand, Korea, Turkey, UAE, Qatar, Iran, Saudi Arabia, Kuwait, Germany, France, Canada, USA, Brazil, Etc.

MAIN SCOPE SUPPLY:

EPS Project Line:

EAF, LF, Continuous Casting Machine, Preheating Furnace, Hot Rolling Mill Line, Cold Rolling Line, Centrifugal Casting Line, Slitting Line,Cut-to-length Line, Cleaning Line, Pickling Line, Coating line, Levelling line, Billet grinding line ETC.

Components & Parts:

Mill stand, Coiler, Uncoiler, Gearbox, Leveller, Copper Mould Tube, Copper Mould Plate, Water Jacket, Water Cooled Cable, Forged Rolls, Casting Rolls, Roll Shell, Roll Core,Bearing, Universal Shaft, Lathe, ETC.

​